STEP 1: Fold a piece of paper in eight sections, four creases
radiating out from the center as shown.
STEP 2: Starting in one section, draw a design that will be
repeatedly traced to the next section creating a pattern.
STEP 3: Transfer the drawing onto a self-adhesive piece of craft
foam. Shown below.
STEP 4: Mount on a wooden board and carve out design using a
craft-knife.
STEP 5: Embellish with scrap pieces using a paper punch if so
desired. In my floor design I opted to have just the center piece and didn’t
ink the edges.
STEP 6: Using a braying tool, ink the design and stamp onto the
faux wood concrete with the stain used in your graining project.
.JPG)
